One Way to Dye Your Own Carpets

Spray Tanning - One Way to Dye Your Own Carpets

Hi friends. Yesterday, I learned about Spray Tanning - One Way to Dye Your Own Carpets. Which is very helpful for me and you. One Way to Dye Your Own Carpets

The tan floor covering in #216 was shot.

What I said. It is not in conclusion that the actual about Spray Tanning . You look at this article for home elevators what you want to know is Spray Tanning .

Spray Tanning

It was hopeless.

A new floor covering was needed.

That meant pulling up the old one, scraping off the pad, and then calling the floor covering man and shelling out 00 or more.

It wasn't anyone's fault.

The floor covering had served well.

But, upon closer examination, I decided it wasn't indubitably in that bad of shape.

It didn't have frayed edges, or worn down spots, and the nap was still pretty good. It just looked terrible. Bleach spots, stains, dark trails down the hallway and into the living room, and light spots where the sun had hit it on a daily basis straight through the windows.

No one would rent the apartment with a floor covering in that condition.

I steam cleaned it in hopes that it would be miraculously healed.

No such luck.

Then it hit me.

Why not try dyeing the bleached out spots to blend in with the carpet.

I purchased an 8 ounce bottle of Rit tan dye (the kind you use for dyeing clothes) at the drug store for , mixed a dinky in a spray bottle with steaming hot water, shook it up and sprayed the spots.

They came out a brassy brown, nothing like the color of the existing carpet.

I had the floor covering expertly steam cleaned. indubitably they could perform a miracle.

Nope.

But I noticed that my dyeing job over the bleached out spots had maintained its former color.

Then it occurred to me, why not try dyeing the entire floor covering to match the spots I had sprayed?

Two pictures came to mind on how I might do this.

I could mix the dye with hot water in my dinky steam cleaner (one like you would rent at the market) or I could use a pump up garden sprayer. I decided on the sprayer because the tenant below had suffered straight through adequate steam cleaning noise.

I purchased an Ace Sprayer for .

I mixed 8 tablespoons of dye into the 2 quarts of steaming hot water in the sprayer, screwed in the pump, shook up the contents and pumped it up.

I settled four 1"x 6" x 3' pieces of wood along the edges of the walls so as not to get dye on the white paint. I adjusted the nozzle on the sprayer to a fine spray and began.

I moved the boards as I dyed, but after a while as I became customary with the sprayer, I didn't indubitably need them.

Also, after dyeing a section, and before reloading the sprayer, I used my dinky Bissell floor covering sweeper to even out the areas I had sprayed and work the dye into the carpet.

But still, the bleached out spots didn't match the total floor covering color after I ended dyeing.

So the next day I applied an additional one coat.

Better, but still not good enough.

Then I went back to the store for more dye, but they didn't have anymore tan. I went to three other stores, but no tan.

So, I bought Rit's dark brown dye.

This turned out to be a blessing in disguise.

I put 4 tablespoons of this darker dye into my 2 quarts of steaming hot water, pumped up the sprayer and applied an additional one coat.

That's when the magic began to happen.

The darker brown indubitably kicked in.

The trails down the hallway disappeared, as did the light spots under the windows.

The floor covering started to look like a real floor covering again, but the bleached out spots still dyed a slightly darker shade than the rest of the carpet.

To compensate for this I dyed other parts of the floor covering darker by spraying more dye on them, and continued using my floor covering sweeper to even out the dye and work it into the nap. My goal was to blend all things together.

It worked... Somewhat.

I applied two coats of the dark brown dye, about worth of dye, over a 700 quadrate foot area.

It was easy, and fun to do.

By the time I applied the second coat the floor covering looked approximately new.

Because I've obsessed over the bleached out stains in the floor covering I can still find some of them, but not all. There is a dinky darkening in the floor covering where they once existed, but when a potential tenant came straight through to rent the apartment, and I explained to her what I had done, she glanced at it, said it looked fine, and went to look at the kitchen.

My daughter and my neighbor also viewed the floor covering and both stated it looked great, good than their own carpets.

But I know it's not perfect. It went from a D- or F to a C+/ B- or maybe even a B, and those grades indubitably depend on what angle you look at the floor covering from.

My father mentioned that the dye might be toxic.

I hadn't belief of that. I figured if you could dye your clothes with it you could indubitably do a carpet.

But to be safe I called Rit, the makers of the dye, and their representative assured me that all their dyes are non-toxic, but that they don't propose using them on carpets because some of their customers have called and said the dye rubs off over time.

I went back up to #216, soaked a rag with steaming hot water, and tried to rub off the dye in any spots.

Nothing happened.

Maybe in time the dye will wear off in well traveled areas.

I'm not sure.

Time will tell.

But if it does wear off, and the floor covering is still usable, why not dye those areas again, like repainting walls, or staining wood doors and trim that touch wear and tear?

P.S. My daughter recommend that I consist of this following idea: Why not cut out a stencil of your beloved design, say a star or elephant, place it over the stain or bleached out spot, and then spray the dye into the stencil. A lot easier than dyeing the entire carpet!

Just a thought.

I hope you obtain new knowledge about Spray Tanning . Where you may offer easy use in your evryday life. And above all, your reaction is passed about Spray Tanning .