Make a Home Made Kid Race Car

Spray Tanning Equipment - Make a Home Made Kid Race Car

Good evening. Today, I found out about Spray Tanning Equipment - Make a Home Made Kid Race Car. Which could be very helpful for me and also you. Make a Home Made Kid Race Car

Get ready for racing fun with this Home Made Kid Race Car!

What I said. It is not in conclusion that the real about Spray Tanning Equipment. You look at this article for information on that wish to know is Spray Tanning Equipment.

Spray Tanning Equipment

Materials

Rectangular Boxes - apple boxes, xerox paper boxes or similar

Colorful plastic or paper plates

Spray paint

Construction paper in various colors

Heavy ribbon

Staple gun

Brad fasteners

Craft knife

Glue and Masking tape

Markers

Foam letters and numbers to decorate

Instructions:

Prepare the Box - Start with one rectangular box for each party guest. If the box has flaps, cut them off with the craft knife. Turn the box upside down and cut out a square area on one side of the bottom (now the top of your race car) big adequate to adapt a child.

Paint Your Race Car - Spray paint your box a tantalizing color - red, blue, green, yellow, or orange.

Attach "Suspenders" - Using the staple gun, staple heavy ribbon from end to end on either side of the box as "suspenders" to allow kids to wear their cars.

Add Wheels - pick four plastic plates to make two wheels on either side of the box. Use a contrasting color to the color of the race car box itself. Fasten the plates with brads so the wheels will turn. Add other plate on top of the box to make a functioning steering wheel.

Add Headlights and Tail Lights - Cut two circles of yellow building paper and glue to the front of the car for headlights. Cut two smaller circles of red building paper and glue to the rear end of the car for tail lights.

Make an Exhaust Pipe - Make an exhaust pipe from a toilet paper tube with crepe paper streamers. Attach the tube to the car by development a series of cuts colse to one end of the tube, flaring it out against the back of the car, and securing with masking tape.

Personalize Your Race Car - using colored building paper shapes, markers, foam numbers and letters.

Now make a race track in your yard using caution tape, old tires, hay bales, or whatever. For great ideas on incorporating this craft into a party, visit our Race Car Birthday Party page.

I hope you will get new knowledge about Spray Tanning Equipment. Where you may put to utilization in your day-to-day life. And most significantly, your reaction is passed about Spray Tanning Equipment.