One Way to Dye Your Own Carpets

One Way to Dye Your Own Carpets

Spray Tanning - One Way to Dye Your Own Carpets Hello everybody. Yesterday, I discovered Spray Tanning - One Way to Dye Your Own Carpets. Which could be very helpful in my experience so you.

The tan floor covering in #216 was shot. What I said. It is not the conclusion that the real about Spray Tanning. You read this article for information on that need to know is Spray Tanning. Spray Tanning It was hopeless. A new floor covering was needed. That meant pulling up the old one, scraping off the pad, and then calling the floor covering man and shelling out 00 or more. It wasn't anyone's fault. The floor covering had served well. But, upon closer examination, I decided it wasn't as a matter of fact in that bad of shape. It didn't have frayed edges, or worn down spots, and the nap was still pretty good. It just looked terrible. Bleach spots, stains, dark trails down the hallway and into the living room, and light spots where the sun had hit it on a daily basis through the windows. No one would rent the apartment with a floor covering in that condition. I steam cleaned it in hopes that it would be miraculously healed. No such luck. Then it hit me. Why not try dyeing the bleached out spots to blend in with the carpet. I purchased an 8 ounce bottle of Rit tan dye (the kind you use for dyeing clothes) at the drug store for , mixed a wee in a spray bottle with steaming hot water, shook it up and sprayed the spots. They came out a brassy brown, nothing like the color of the existing carpet. I had the floor covering professionally steam cleaned. as a matter of fact they could accomplish a miracle. Nope. But I noticed that my dyeing job over the bleached out spots had maintained its primary color. Then it occurred to me, why not try dyeing the entire floor covering to match the spots I had sprayed? Two pictures came to mind on how I might do this. I could mix the dye with hot water in my wee steam cleaner (one like you would rent at the market) or I could use a pump up organery sprayer. I decided on the sprayer because the tenant below had suffered through sufficient steam cleaning noise. I purchased an Ace Sprayer for . I mixed 8 tablespoons of dye into the 2 quarts of steaming hot water in the sprayer, screwed in the pump, shook up the contents and pumped it up. I placed four 1"x 6" x 3' pieces of wood along the edges of the walls so as not to get dye on the white paint. I adjusted the nozzle on the sprayer to a fine spray and began. I moved the boards as I dyed, but after a while as I became customary with the sprayer, I didn't as a matter of fact need them. Also, after dyeing a section, and before reloading the sprayer, I used my wee Bissell floor covering sweeper to even out the areas I had sprayed and work the dye into the carpet. But still, the bleached out spots didn't match the uncut floor covering color after I fulfilled, dyeing. So the next day I applied other coat. Better, but still not good enough. Then I went back to the store for more dye, but they didn't have anymore tan. I went to three other stores, but no tan. So, I bought Rit's dark brown dye. This turned out to be a blessing in disguise. I put 4 tablespoons of this darker dye into my 2 quarts of steaming hot water, pumped up the sprayer and applied other coat. That's when the magic began to happen. The darker brown as a matter of fact kicked in. The trails down the hallway disappeared, as did the light spots under the windows. The floor covering started to look like a real floor covering again, but the bleached out spots still dyed a slightly darker shade than the rest of the carpet. To compensate for this I dyed other parts of the floor covering darker by spraying more dye on them, and prolonged using my floor covering sweeper to even out the dye and work it into the nap. My goal was to blend all things together. It worked... Somewhat. I applied two coats of the dark brown dye, about worth of dye, over a 700 square foot area. It was easy, and fun to do. By the time I applied the second coat the floor covering looked roughly new. Because I've obsessed over the bleached out stains in the floor covering I can still find some of them, but not all. There is a wee darkening in the floor covering where they once existed, but when a potential tenant came through to rent the apartment, and I explained to her what I had done, she glanced at it, said it looked fine, and went to look at the kitchen. My daughter and my neighbor also viewed the floor covering and both stated it looked great, good than their own carpets. But I know it's not perfect. It went from a D- or F to a C+/ B- or maybe even a B, and those grades as a matter of fact depend on what angle you look at the floor covering from. My father mentioned that the dye might be toxic. I hadn't notion of that. I figured if you could dye your clothes with it you could as a matter of fact do a carpet. But to be safe I called Rit, the makers of the dye, and their representative assured me that all their dyes are non-toxic, but that they don't propose using them on carpets because some of their customers have called and said the dye rubs off over time. I went back up to #216, soaked a rag with steaming hot water, and tried to rub off the dye in any spots. Nothing happened. Maybe in time the dye will wear off in well traveled areas. I'm not sure. Time will tell. But if it does wear off, and the floor covering is still usable, why not dye those areas again, like repainting walls, or staining wood doors and trim that experience wear and tear? P.S. My daughter recommend that I include this following idea: Why not cut out a stencil of your beloved design, say a star or elephant, place it over the stain or bleached out spot, and then spray the dye into the stencil. A lot easier than dyeing the entire carpet! Just a thought. I hope you will get new knowledge about Spray Tanning. Where you'll be able to offer used in your day-to-day life. And most significantly, your reaction is passed about Spray Tanning. Read more.. One Way to Dye Your Own Carpets.